[arm-allstar] Advise on audio
Joel Jameson
w0kgw3 at gmail.com
Mon Sep 15 21:22:31 EST 2014
Clarification: Using a service deviation meter, tone set to 1KHz, deviation
to 3k with tone so 3.6k. MSF set to pre-emphasis audio, connected via J2
pins for line 1 & 2
The audio coming from external to the BBB to the repeater is what's
affected while listening on the HT.
Repeater to Repeater is fine,
Repeater -> URI -> BBB is fine (listening on iaxrpt),
Audio from the BBB (Allison) -> URI -> MSF5000 is fine
Audio from external to BBB is fine (listening on iaxrpt)
The same audio from External -> BBB -> URI -> MSF5000 is choppy as heard on
the HT and other radios.
Cheers,
Joel
W0KGW
On Mon, Sep 15, 2014 at 8:31 PM, Joel Jameson <w0kgw3 at gmail.com> wrote:
> Using the simpleusb setup procedures, set to 3.6k (with tone) deviation
> for both transmit and receive.
>
> The other tidbit, audio sounds fine in iaxrpt from all sources. It's just
> listening on the HT to any audio coming from outside the BBB
>
> Cheers,
> Joel
> W0KGW
>
> On Mon, Sep 15, 2014 at 6:54 PM, David McGough <kb4fxc at inttek.net> wrote:
>
>>
>> Hi Joel,
>>
>> How did you set the MSF5000 TX deviation level???
>>
>> (The recommended procedure uses the simple-tune-menu program)
>>
>>
>> 73, David KB4FXC
>>
>> On Mon, 15 Sep 2014, Joel Jameson wrote:
>>
>> > We just got through doing the deviation meter on the audio path to/from
>> the
>> > BBB and MSF5000 repeater.
>> >
>> > Audio from:
>> > Local repeater to Local repeater is now great
>> > Allison (asterisk voice) via URI to Repeater is great
>> > Repeater to BBB is great.
>> > local iaxrpt audio via local ethernet connection is choppy coming out
>> the
>> > repeater
>> > remote audio from internet sources are choppy coming out the repeater,
>> same
>> > as above.
>> >
>> > By choppy it sounds like severe packet loss or a digital limit is being
>> > hit. A quieter voice doesn't seem to be affected near as much as a
>> strong
>> > signal.
>> >
>> > With Allison playing fine, I'm on the path that the audio connection
>> from
>> > BBB -> URI -> MSF5000 is good, however I'm baffled why the audio from
>> > outside the BBB would sound choppy, even local (same gigabit lan) comes
>> out
>> > choppy.
>> >
>> > Any suggestions, or wisdom for what I should start to look into?
>> >
>> > Cheers,
>> > Joel
>> > W0KGW
>> >
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB web page -
>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20140915/df9561a9/attachment.html>
More information about the arm-allstar
mailing list