[arm-allstar] Advise on audio

[Joel Jameson]

Using the simpleusb setup procedures, set to 3.6k (with tone) deviation for
both transmit and receive.

The other tidbit, audio sounds fine in iaxrpt from all sources. It's just
listening on the HT to any audio coming from outside the BBB

Cheers,
Joel
W0KGW

On Mon, Sep 15, 2014 at 6:54 PM, David McGough <kb4fxc at inttek.net> wrote:

>
> Hi Joel,
>
> How did you set the MSF5000 TX deviation level???
>
> (The recommended procedure uses the simple-tune-menu program)
>
>
> 73, David KB4FXC
>
> On Mon, 15 Sep 2014, Joel Jameson wrote:
>
> > We just got through doing the deviation meter on the audio path to/from
> the
> > BBB and MSF5000 repeater.
> >
> > Audio from:
> > Local repeater to Local repeater is now great
> > Allison (asterisk voice) via URI to Repeater is great
> > Repeater to BBB is great.
> > local iaxrpt audio via local ethernet connection is choppy coming out the
> > repeater
> > remote audio from internet sources are choppy coming out the repeater,
> same
> > as above.
> >
> > By choppy it sounds like severe packet loss or a digital limit is being
> > hit. A quieter voice doesn't seem to be affected near as much as a strong
> > signal.
> >
> > With Allison playing fine, I'm on the path that the audio connection from
> > BBB -> URI -> MSF5000 is good, however I'm baffled why the audio from
> > outside the BBB would sound choppy, even local (same gigabit lan) comes
> out
> > choppy.
> >
> > Any suggestions, or wisdom for what I should start to look into?
> >
> > Cheers,
> > Joel
> > W0KGW
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20140915/f6b37935/attachment.html>