[arm-allstar] Allstar Portal Configuraiton of BBB?

[John]

Thanks for the clarification. Knew about the ports, but thought their might be more. Just trying to cover as many bases as possible before embarking on the next node. 

John

Sent from my iPhone

> On Sep 3, 2014, at 12:20 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> John,
> 
>   Well the info on your server and node - freq, location, etc. should be setup for informational reasons if you want to display your node's info on the allstar stats page.
> 
> The only operational one that is important is the server port. It defaults to 4569 which is fine if you just have one server but if you have more than one server on the same single public IP you will need to change the additional servers to unique ports. I usually go down 4568, 4567, etc.    You would then need to also change the port in iax.conf to match the port set at allstarlink and port forward it accordingly in your router. Also if you want the servers to talk to each other locally you would need to list them in the nodes stanza of rpt.conf with the correct port at both ends. This is detailed on the BBB web page. In this situation of more than one server you would also want to change the ssh port number from the default 222 to another port on the additional servers and port forward it also. This is only necessary if you want to ssh in from outside your LAN.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> > From: wb5nfc at gmail.com
> > Date: Wed, 3 Sep 2014 10:57:10 -0500
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] Allstar Portal Configuraiton of BBB?
> > 
> > Thanks, David. Other than general node information display, are there any settings in the portal that affect BBB operation? Like others, I'm slowly replacing old, power-hungry computers with BBBs.
> > 
> > J.
> > 
> > Sent from my iPhone
> > 
> > > On Sep 3, 2014, at 10:44 AM, David McGough <kb4fxc at inttek.net> wrote:
> > > 
> > > 
> > > Hi John,
> > > 
> > > The default firmware image isn't configured to use the config system 
> > > on the AllStar portal. I would highly recommend manual configuration.
> > > 
> > > 73, David KB4FXC
> > > 
> > > 
> > >> On Wed, 3 Sep 2014, John wrote:
> > >> 
> > >> Is the BBB directly compatible with the Allstar Portal's configuration
> > >> capabilities? I've been manually editing files on the BBB because the
> > >> portal has old nodes configured that I'm replacing with Beaglebones. If the
> > >> portal and 'Bones work and play well together, I'll do it differently with
> > >> the next one.
> > >> 
> > >> Thanks!
> > >> 
> > >> John
> > > 
> > > _______________________________________________
> > > 
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > 
> > > Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> > _______________________________________________
> > 
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > 
> > Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> > 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20140903/79beaca5/attachment.html>