[arm-allstar] Audio Stuttering Help

[John]

Hello Doug. Looks like we're talking about the same program.
http://www.xelatec.com/xipar/iaxrpt  It's Steve Henke's iaxRpt Windows
client. I'm using it under CrossOver on a MacBook Pro.

Completely stock image. V1.04 of May 22. Node configuration as per your
basic documentation, nothing more. SimpleUSB not configured yet. No radio
connected. I'm showing to be registered with node 2186 (Allstar) and
Echolink 152242 - WB5NFC-L. At this point, I'm only connecting with iaxRpt
to the node, issuing a *81 or hearing the CW ID upon first forced transmit
via iaxRpt. Both are severely distorted. No errors noted from the CLI
with asterisk
-rvvv. No additional nodes operational at this time. I have not tried
increasing the Asterisk loading delay yet - but I will.

My 'fun' meter is pegged out for tonight (work tomorrow) and I have an
obligation tomorrow night, so it may be a day or two before I revisit
troubleshooting. Thanks for the suggestions and help pointing me in the
right direction.

John



On Sun, Jun 29, 2014 at 10:02 PM, Doug Crompton <doug at crompton.com> wrote:

> John,
>
>   I presume you are referring to iaxRpt when you say PPT Dispatcher? Is
> this a stock image? Did you make any changes? Give us more info on how much
> you configured the system. Did you enter your assigned node? What are you
> connecting to on the BBB?
>
> In some rare cases you may need to increase the delay time before Asterisk
> is loaded. This is done in /etc/rc.local  You will see a sleep 30 in there.
> Change it to 45 or 60 and see if that helps. Before you do that bring the
> system up and after a minute or so do a asterisk restart  - astres.sh  -
> and see if it still does it. If it doesn't then increase the delay.
>
> Also in asterisk client - asterisk -rvvv -  are you getting any errors? Do
> you have a radio connected?
>
> If you have another working Allstar node perhaps we could connect and
> discuss this.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Sun, 29 Jun 2014 20:26:00 -0500
> From: wb5nfc at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Audio Stuttering Help
>
>
> Initial setup of my BBB went very smoothly. I'm listing to my node using
> Xelatec PPT Dispatcher. Time, day and CW IDs suffer from bad digital
> stuttering. How do I best begin to troubleshoot this problem?
>
> Thanks for any suggestions.
>
> John / WB5NFC
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>



-- 
John Kenney
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20140629/ce65078d/attachment.html>