[Arm-allstar-irlp] Repeater pulsing

[Doug Crompton]

Glenn,

 Sorry for the delay....  The courtesy tone is normal and you I think would
want this in a repeater.
It only goes out over RF NOT back over any Allstar, Echolink, or IRLP
connections. So I don't think it is a problem at all. You can turn the
courtesy tone off in rpt.conf by setting - nounkeyct=1 and restarting
Asterisk.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Thu, Apr 11, 2019 at 3:35 PM "ka5tkn--- via ARM-allstar-irlp" <
arm-allstar-irlp at hamvoip.org> wrote:

> Howdy Doug , Need to bother you again.. I have moved one of my nodes to a
> new repeater. The node is connected as the controller of the repeater. I
> changed the rep.conf to duplex2 and disabled the squelch tail. However when
> connected to another node, it always receive a curiosity tone after every
> unkeyed mike. I don't know if this is causing the  pulseing on any
> reflector. I don't have excess to pulseck.. any thoughts on how to correct
> it..Thanks again for all the help..Glenn K5CODSent via the Samsung Galaxy
> Note5, an AT&T 4G LTE smartphone
> _______________________________________________
> ARM-allstar-irlp mailing list
> ARM-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>