[Arm-allstar-irlp] Repeater pulsing

[ka5tkn@suddenlink.Net]

Thanks for the reply Doug.  Will keep the courtesy tone..still trying to figure out how to stop the repeater from pulsing. It will only do that when it is connected to another node?Glenn K5CODSent via the Samsung Galaxy Note5, an AT&T 4G LTE smartphone
-------- Original message --------From: Doug Crompton via ARM-allstar-irlp <arm-allstar-irlp at hamvoip.org> Date: 4/17/19  11:02 PM  (GMT-06:00) To: arm-allstar-irlp at hamvoip.org Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [Arm-allstar-irlp] Repeater pulsing Glenn, Sorry for the delay....  The courtesy tone is normal and you I think wouldwant this in a repeater.It only goes out over RF NOT back over any Allstar, Echolink, or IRLPconnections. So I don't think it is a problem at all. You can turn thecourtesy tone off in rpt.conf by setting - nounkeyct=1 and restartingAsterisk.*73 Doug**WA3DSP**http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*On Thu, Apr 11, 2019 at 3:35 PM "ka5tkn--- via ARM-allstar-irlp" <arm-allstar-irlp at hamvoip.org> wrote:> Howdy Doug , Need to bother you again.. I have moved one of my nodes to a> new repeater. The node is connected as the controller of the repeater. I> changed the rep.conf to duplex2 and disabled the squelch tail. However when> connected to another node, it always receive a curiosity tone after every> unkeyed mike. I don't know if this is causing the  pulseing on any> reflector. I don't have excess to pulseck.. any thoughts on how to correct> it..Thanks again for all the help..Glenn K5CODSent via the Samsung Galaxy> Note5, an AT&T 4G LTE smartphone> _______________________________________________> ARM-allstar-irlp mailing list> ARM-allstar-irlp at hamvoip.org> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp>_______________________________________________ARM-allstar-irlp mailing listARM-allstar-irlp at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp