[Arm-allstar-irlp] Experimental Reflectors

[David McGough]

Here is an update to my earlier message....Appearently even the 
old/original ACID AllStar/chan_irlp systems have problems with 
experimental reflectors.

Paul (KN2R) and I did some analysis tonight and more will be happening
shortly. Greg reported an that when a normal station node (stnXXXX) tries
to connect to an experimental reflector, only the first 3 digits of the
node number seem to get through. I confirmed that when I try to connect 
from my test station: stn3787, it shows up on the experimental reflector 
only as: 378....Hum. Strange.  I'm wondering if there is a protocol bug 
in the chan_irlp code...I'm investigating.

73, David KB4FXC



On Sun, 15 Apr 2018, David McGough wrote:

> 
> Hi Everyone,
> 
> We're confirmed that connecting to experimental reflectors seems to fail. 
> Previously, I thought that I COULD successfully connect, however, I now 
> think this wasn't the case.
> 
> ...So, the next question: Has AllStar/chan_irlp *EVER* been able to 
> connect to experimental reflectors??? ---even the original code, running 
> on old ACID servers??
> 
> 73, David KB4FXC
> 
> 
> 
> On Sun, 15 Apr 2018, Doug Crompton wrote:
> 
> > It seems some can connect and others cannot. Keep in mind that experimental
> > nodes have a different database that may only be updated daily and not all
> > entries may be accurate or online. It is important for you to leave you
> > node on for node updates.
> > 
> > For those having problem with experimental nodes please give us the node
> > numbers you are NOT having success with so we can test.
> > 
> > 
> > *73 Doug*
> > 
> > *WA3DSP*
> > 
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > 
> > 
> > On Sun, Apr 15, 2018 at 6:32 AM, randy thomas <k8khw at att.net> wrote:
> > 
> > > Doug
> > > When I call the Experlmental Reflector
> > > I notice on my Experimental Reflector
> > > Log it shows stn812 not the full irlp
> > > node number then allstar disconnects
> > > So it goes like this I call the
> > > Experimental Node allstar says 80072 link active the connection shows up
> > > on my Experimental Reflector status page as stn812
> > > Then after maybe 5 seconds Allstar
> > > Disconnects and says the connection
> > > Failed
> > > Randy
> > >
> > > Sent from my iPhone
> > >
> > > On Apr 15, 2018, at 4:30 AM, randy thomas <k8khw at att.net> wrote:
> > >
> > > Doug
> > > We still can not connect to most Experimental Reflectors Its really
> > > strange when you call the experimental Reflector I get the voice
> > > saying Number 80072 link Active then
> > > in a few seconds It will say 80072
> > > connection failed It seems to work
> > > fine on all regular Nodes and Reflectors
> > >   Randy K8khw
> > >
> > > Sent from my iPhone
> > >
> > > On Apr 14, 2018, at 11:36 PM, Doug Crompton <wa3dsp at gmail.com> wrote:
> > >
> > > I have not heard any talk about this lately but early on people were
> > > having problems with experimental reflectors. Is this still the case? Has
> > > anything been resolved on this. We have tested this and we are able to
> > > connect to anything we tried.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > >
> > > _______________________________________________
> > > Arm-allstar-irlp mailing list
> > > Arm-allstar-irlp at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
> > >
> > > _______________________________________________
> > > Arm-allstar-irlp mailing list
> > > Arm-allstar-irlp at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
> > >
> > >
> > > _______________________________________________
> > > Arm-allstar-irlp mailing list
> > > Arm-allstar-irlp at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
> > >
> > >
> > 
> 
> _______________________________________________
> Arm-allstar-irlp mailing list
> Arm-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>