[arm-allstar] Hamlib / GPIOs for Channel Steering

[David McGough]

Here is info on Motorola Channel Steering:

https://www.repeater-builder.com/motorola/maxtrac/remote-channel-select.html

73, David K4FXC


On Mon, 11 Mar 2024, kd6gdb--- via ARM-allstar wrote:

> I would love to see code on the showing of "last channel selected" on
supermon and remote programming sounds interesting as well.

I am still dumbfounded as to what I am doing wrong with my BCD
configuration for 16 channel GM300's my channel 16 selection BCD 1111
selects channel 15 (not 16) on each of the radios.

On Mon, Mar 11, 2024 at 6:26 PM Dave Petrie via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> i use two cdm1250's vhf uhf 20 watt transmit
> 15 channels each
> only one radio on at a time
> voice announcement
> remote programming
> supermon shows the channel last selected
> i am putting one together that supports allstar hamvoip repeater on one
> usb sound card interface
> and a private node for the dual band remote base on another
> and usb to serial for rib programming if i can get the right adapter
> Prolific 2303
> or i can use a comtrol ip to serial 4 port box
> a lot of work
> there might be a simpler solution
> be glad ti teamviewer demo
> Dave wa2kjc
>
>
>
>
> Sent from my iPhone
>
> > On Mar 11, 2024, at 5:53 PM, Josh Hatton via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Good Day to All,
> >
> > A few questions:
> >
> > 1) What dual-band radio has the most success working with Hamlib for
> remote
> > base feature, as a "second node" on a HamVoIP image? Any lessons learned?
> >
> > 2) Has anyone successfully used Pi GPIOs to perform channel steering of
> > Motorola GM300s? If so, are you able to explain how you got success in
> it?
> >
> > 3) Does Supermon have the ability to control Hamlib<>RS232 to
> serial<>radio
> > through the webpage?
> >
> > Thanks to all for your advice.
> >
> > Josh W4ZZK
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>


-- 
Pursuant to U.S. Code, title 47, Chapter 5, Sub chapter II, ß227,
"Any and all non solicited commercial E-mail sent to this address is
subject to a download and archival fee of $500.00 U.S.". E-mailing denotes
acceptance of these terms.
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org