[arm-allstar] Error message when testing DTMF commands from Supermon 6.2+ h

[Dave Petrie]

have a look over the attached document and especially page 3
item3.
you have to login supermon before it will take any commands
and you have to click on the login tab and not just enter the username
and password and hit enter, the login at the top of supermon will change
from login to logout if you are successfully logged into supermon
Dave wa2kjc




On Mon, Jan 29, 2024 at 1:12 AM Tony Fiorda via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Hello.  I have a fairly new configuration of Supermon 6.2 and was trying to
> test issuing a DTMF command to my node.  However I get the following error
> message: 'ERROR: You Must login to use the 'DTMF' function!' when pressing
> the DTMF button.  Is there something I need to configure in DTMF.php?  The
> proper info is in almon.ini.
>
>
>
> Tony...
>
> WB8ZWI
>
> WRQJ370
>
>
>
> Sent from my Compuserve Account
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: supermon_howto.pdf
Type: application/pdf
Size: 989579 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20240129/ff287147/attachment.pdf>