[arm-allstar] Pi 4B won't boot

[Patrick Perdue]

Michael:

If you have a working image that old, you most likely have old 
firmware/kernel version from before the rPi 4 was supported.

There is a process you can follow to upgrade your existing image without 
rebuilding it. Note that kernel/firmware upgrades don't come with the 
normal HamVoIP update unless you change repositories.

http://lists.hamvoip.org/pipermail/arm-allstar/2022-May/017897.html

HTH.

73

N2DYI


On 1/9/2024 10:09 AM, Michael A Blake via ARM-allstar wrote:
> I have a working node on a Pi3B that has been running for years now. I would
> say 4 to 5 years. I have done all the update as they have rolled out over
> the years. I wanted to change the Pi3 to a Pi 4b. Moving the chip to the new
> Pi it will not boot for me on the new Pi.
> Question: Am I going to have to rebuild the image and on the chip with a new
> download copy of Hamvoip and if so. Is there a way to just copy files over
> to the new install and not have to go and change all the setting in the new
> install?
>
> Michael Blake
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org