[arm-allstar] Hamvoip GPIO support Pi 400

[Steve Arntz]

Thank you very much.  I appreciate all that you do.

73 Steve, KM5HT

On Thu, Feb 29, 2024 at 9:34 AM David McGough <kb4fxc at inttek.net> wrote:

>
> Hi Steve,
>
> Hummm...I'll update this package.
>
> 73, David K4FXC
>
>
> On Thu, 29 Feb 2024, Steve Arntz via ARM-allstar wrote:
>
> > I am trying to use the GPIO pins on a raspberry Pi 400 under Hamvoip
> 1.7-06
> > I get the error msg " Oops - unable to determine board type... model: 19"
> >
> > Is there a later hamvoip-gpio-support package I can install to support
> the
> > Pi 400?
> >
> > It looks like I may need gpio 2.61, but am not sure how to install that.
> >
> > Thanks in advance
> > 73 Steve, KM5HT
> >
> > RPi2-3-4 Version 1.7-06 Allstar - November 29, 2023 - K4FXC
> > Last login: Thu Feb 29 08:33:10 2024 from 10.18.103.252
> >
> > [repeater]$ gpio -v
> > gpio version: 2.60
> > Copyright (c) 2012-2018 Gordon Henderson
> > This is free software with ABSOLUTELY NO WARRANTY.
> > For details type: gpio -warranty
> > Raspberry Pi Details:
> >   Type: Unknown19, Revision: 00, Memory: 4096MB, Maker: Sony
> >   * Device tree is enabled.
> >   *--> Raspberry Pi 400 Rev 1.0
> >   * This Raspberry Pi supports user-level GPIO access.
> >
> > [repeater]$ gpio readall
> > Oops - unable to determine board type... model: 19
> >
> > [repeater]$ pacman -Ss hamvoip-gpio-support
> > hamvoip-RPi4B14/hamvoip-gpio-support 0.4-8 [installed]
> >     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., to
> >     provide AllStar GPIO
> > hamvoip/hamvoip-gpio-support 0.3-1 [installed: 0.4-8]
> >     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., to
> >     provide AllStar GPIO
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>