[arm-allstar] Hamvoip GPIO support Pi 400

[David McGough]

Hi Steve,

Hummm...I'll update this package.

73, David K4FXC


On Thu, 29 Feb 2024, Steve Arntz via ARM-allstar wrote:

> I am trying to use the GPIO pins on a raspberry Pi 400 under Hamvoip 1.7-06
> I get the error msg " Oops - unable to determine board type... model: 19"
> 
> Is there a later hamvoip-gpio-support package I can install to support the
> Pi 400?
> 
> It looks like I may need gpio 2.61, but am not sure how to install that.
> 
> Thanks in advance
> 73 Steve, KM5HT
> 
> RPi2-3-4 Version 1.7-06 Allstar - November 29, 2023 - K4FXC
> Last login: Thu Feb 29 08:33:10 2024 from 10.18.103.252
> 
> [repeater]$ gpio -v
> gpio version: 2.60
> Copyright (c) 2012-2018 Gordon Henderson
> This is free software with ABSOLUTELY NO WARRANTY.
> For details type: gpio -warranty
> Raspberry Pi Details:
>   Type: Unknown19, Revision: 00, Memory: 4096MB, Maker: Sony
>   * Device tree is enabled.
>   *--> Raspberry Pi 400 Rev 1.0
>   * This Raspberry Pi supports user-level GPIO access.
> 
> [repeater]$ gpio readall
> Oops - unable to determine board type... model: 19
> 
> [repeater]$ pacman -Ss hamvoip-gpio-support
> hamvoip-RPi4B14/hamvoip-gpio-support 0.4-8 [installed]
>     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., to
>     provide AllStar GPIO
> hamvoip/hamvoip-gpio-support 0.3-1 [installed: 0.4-8]
>     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., to
>     provide AllStar GPIO
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>