[arm-allstar] Line Numbers SSH

[Luc Drolet VE2LUQ]

Oops, there is no dot in the line

"cat /etc/asterisk/rpt.conf -n »

cat  /etc/asterisk/rpt.conf -n



Luc Drolet VE2 LUQ
Président de VE2CVA
C.R.A.V.A.
Club Radio Amateur Vallée de l'Amiante
VE2 CVA
ve2cva at gmail.com
ldrolet at cgocable.ca
https://clubs.raqi.ca/ve2cva/
https://www.facebook.com/groups/ve2cva
Instagram : https://www.instagram.com/ve2cva/
Echolink =   VE2RVA-R    NODE #24560
Sécurité Civil du Québec, Node #1400








> Le 18 févr. 2024 à 03:27, Luc Drolet VE2LUQ <ldrolet at cgocable.ca> a écrit :
> 
> Hi David,
> 
> I just did this,
> "cat ./etc/asterisk/rpt.conf -n"
> and I have line numbers now
> 
> see picture
> 
> but I have to say that “cat” I don’t know what it means!!
> 
> <Capture d’écran, le 2024-02-18 à 03.24.32.png>
> 
> 
> Luc Drolet VE2 LUQ
> Président de VE2CVA
> C.R.A.V.A.
> Club Radio Amateur Vallée de l'Amiante
> VE2 CVA
> ve2cva at gmail.com
> ldrolet at cgocable.ca
> https://clubs.raqi.ca/ve2cva/
> https://www.facebook.com/groups/ve2cva
> Instagram : https://www.instagram.com/ve2cva/
> Echolink =   VE2RVA-R    NODE #24560
> Sécurité Civil du Québec, Node #1400
> 
> 
> 
> 
> 
> 
> 
> 
>> Le 18 févr. 2024 à 03:13, David McGough <kb4fxc at inttek.net> a écrit :
>> 
>> 
>> Try scrolling up/down with the arrow keys, PageUP, PageDown, etc.
>> 
>> 
>> 
>> On Sun, 18 Feb 2024, Luc Drolet VE2LUQ wrote:
>> 
>>> Hello David,
>>> 
>>> I just did a test and it doesn't work
>>> I don't know the line numbers
>>> see the 2 images
>>> which I took to clearly visualize the situation
>>> 
>>> Thank you for your service
>>> 
>>> [root at NODE1006 ~]# nano -c /etc/asterisk/rpt.conf
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Luc Drolet VE2 LUQ
>>> Président de VE2CVA
>>> C.R.A.V.A.
>>> Club Radio Amateur Vallée de l'Amiante
>>> VE2 CVA
>>> ve2cva at gmail.com
>>> ldrolet at cgocable.ca
>>> https://clubs.raqi.ca/ve2cva/
>>> https://www.facebook.com/groups/ve2cva
>>> Instagram : https://www.instagram.com/ve2cva/
>>> Echolink =   VE2RVA-R    NODE #24560
>>> Sécurité Civil du Québec, Node #1400
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>>> Le 18 févr. 2024 à 02:06, David McGough <kb4fxc at inttek.net> a écrit :
>>>> 
>>>> 
>>>> Hi,
>>>> 
>>>> To display the current line number the cursor is on in nano, try:
>>>> 
>>>> nano -c  <filename>
>>>> 
>>>> Note that in HamVoIP, you don't need to use the sudo command to launch 
>>>> nano...At least not from the bash shell prompt.
>>>> 
>>>> 
>>>> 
>>>> 73, David K4FXC
>>>> 
>>>> On Sat, 17 Feb 2024, Luc Drolet VE2LUQ via ARM-allstar wrote:
>>>> 
>>>>> Hello everyone,
>>>> 
>>>> How do I get the line numbers when using "SUDO NANO"
>>>> Currently I'm counting one by one, I find it a bit long!!!
>>>> but i don't know how to get the line numbers
>>>> 
>>>> can you give me some tips
>>>> 
>>>> thank you and good evening
>>>> 
>>>> 
>>>> Luc Drolet VE2 LUQ
>>>> Président de VE2CVA
>>>> C.R.A.V.A.
>>>> Club Radio Amateur Vallée de l'Amiante
>>>> VE2 CVA
>>>> ve2cva at gmail.com
>>>> ldrolet at cgocable.ca
>>>> https://clubs.raqi.ca/ve2cva/
>>>> https://www.facebook.com/groups/ve2cva
>>>> Instagram : https://www.instagram.com/ve2cva/
>>>> Echolink =   VE2RVA-R    NODE #24560
>>>> Sécurité Civil du Québec, Node #1400
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> 
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>> 
>>> 
>>> 
>> 
>