[arm-allstar] HamVoip on Pi3a

[Dustin Perdue]

HamVoIP has supported the 3A Plus for a long time. I have transferred cards between the 3A, Zero 2 and 4 multiple times without issue, or the need to reconfigure anything. Do you know for sure the Wi-Fi on that board actually works? Have you tried it with stock raspberry Pi OS?
Sent from my zippo


> On Feb 1, 2024, at 22:44, WB4IZC via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Good Day Everone,
> 
> I have built a stable HamVOIP image and have had it running using a wifi connection via a Pi3B+ board for a week now.  Upon moving the image to a Pi3a+, the image is not able to establish a wifi connection with the same wifi network as was used on the Pi3B+.  I next moved the image to a PiZero2W and the image establishes a connection upon boot. I am able to SSH into the image on both the Pi3B+ and the PiZero2w boards using established wifi connections.
> 
> To confirm that this is a Pi3a+ issue, I booted the same board with a Pi-Star image that had been using a wifi connection on a PiZeroWH and the Pi-Star image also failed to establish a connection via the Pi3a+ board.
> 
> Any possible fixes that would allow me to use the Pi3a+ with this image would be welcomed.  73, Steve WB4IZC  node 552251
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org