[arm-allstar] HamVoip Not Booting on RPi 3A+

[David McGough]

Tony,

Yes, use the Win32 Disk Imager software included with the download HamVoIP 
firmware.  The Rasbian imager probably won't work correctly.

73, David K4FXC


On Tue, 21 Nov 2023, Tony Loera wrote:

>  Hi David,
> I downloaded the same img.xz file from this link and used RPi Imager to flash it to the SD Card.  Should I be using Win32 instead? 
> -Tony 
>     On Tuesday, November 21, 2023 at 05:42:22 AM PST, David McGough <kb4fxc at inttek.net> wrote:  
>  
>  
> Tony,
> 
> Which HamVoIP image did you download and how did you flash it to the SD 
> card?  These images should work with the RPi3A+ boards:
> 
> https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.exe
> https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz
> 
> Note that both of these files are compressed, so you must uncompress 
> first.
> 
> 73, David K4FXC
> 
> 
> 
> On Tue, 21 Nov 2023, Tony Loera via ARM-allstar wrote:
> 
> > I just picked up a new RPi 3A+ and loaded a fresh image of the latest HamVoip onto a 32GB MicroSD card and the thing wont boot.  I tried different cards as well as working cards and 3 different power supplies but all I get is 4-steady, and 7 fast blinking green lights.
> Funny thing is that the Raspberry OS Runs just fine, but HamVoip just won't boot.  Board revision is 1.1.
> I am out of ideas  
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
>