[arm-allstar] HamVoip Not Booting on RPi 3A+

[Tony Loera]

 Hi David,
I downloaded the same img.xz file from this link and used RPi Imager to flash it to the SD Card.  Should I be using Win32 instead? 
-Tony 
    On Tuesday, November 21, 2023 at 05:42:22 AM PST, David McGough <kb4fxc at inttek.net> wrote:  
 
 
Tony,

Which HamVoIP image did you download and how did you flash it to the SD 
card?  These images should work with the RPi3A+ boards:

https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.exe
https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz

Note that both of these files are compressed, so you must uncompress 
first.

73, David K4FXC



On Tue, 21 Nov 2023, Tony Loera via ARM-allstar wrote:

> I just picked up a new RPi 3A+ and loaded a fresh image of the latest HamVoip onto a 32GB MicroSD card and the thing wont boot.  I tried different cards as well as working cards and 3 different power supplies but all I get is 4-steady, and 7 fast blinking green lights.
Funny thing is that the Raspberry OS Runs just fine, but HamVoip just won't boot.  Board revision is 1.1.
I am out of ideas  
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org