[arm-allstar] signing in with Allstar public authentication

[Don Sayler]

Thanks for the reply Patrick.

I wasn't clear on my question, I'll try to do better :)

In DvSwitch, on the Accounts screen, how do  I set that up?

If I select the 'Use public authentication' box, the screen still wants the
Username & Password from a stanza in iax.conf. Do I need to create a
specific stanza in my node's iax.conf file? Or do I need to use the
'AllstarLink' options under the main screen's 'More' button? Or some
combination of these settings...

Thanks.

On Fri, Mar 3, 2023 at 7:18 AM Patrick Perdue via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Don:
>
> Basically, it logs on to allstarlink.org using your callsign/portal
> password as a web transceiver client, gets an authentication token, then
> makes calls to  nodes using the allstar-public context rather than the
> radio-secure context. This allows calls to nodes without a registration.
> Repeaterphone for iOS also uses this method. However, DVSwitch Mobile
> also has "node mode," which registers to allstarlink.org as a
> stand-alone node.
>
>
>
> On 3/2/2023 9:32 PM, Don Sayler via ARM-allstar wrote:
> > Hi.
> >
> > I could post this in the DvSwitch forum too, but I thought I'd start
> here...
> >
> > How is DvSwitch configured to connect to a node using Allstar public
> > authentication? I can't find any definitive docs, but I certainly could
> > have missed it.
> >
> > Thanks.
> > Don W7OXR
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>