[arm-allstar] Courtesy tones

[Michael Webb]

LaRoy,

in rpt.conf look for:

; COURTESY TONE MAPPING

;unlinkedct=ct2
; Sent when not connected to another node
;remotect=ct3
; Sent when remote base connected

; The linkunkeyct command can be used to
; customize the courtesy tone based on
; a node number. This is useful to identify
; input from a specific node. See the
; howto at hamvoip.org for details.

;linkunkeyct=ct8
                                ; sent when a network user unkeys. This
                                ; method uses the mapped tone for all nodes.

;linkunkeyct=by_node_number,ct8
                                ; Use this method to send a distinct
courtesy
                                ; tone based on node number. If node number
is
                                ; not defined use the default tone shown
here
                                ; as ct8. Comment the linkunkeyct=ct8 above
                                ; when using this method. See the howto on
this
                                ; at hamvoip.org for additional information.

and also look for:

[telemetryNODENUMBERXXXXXX]

ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2=|t(660,880,150,2048)
ct3=|t(440,0,150,4096)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
ct8=|t(700,1100,150,2048) ; 2048 amplitude
remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
remotemon=|t(1209,0,50,2048)
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
patchup=rpt/callproceeding
patchdown=rpt/callterminated


This is what you need right? unlinkedct=ct2

Mike

On Wed, Mar 1, 2023 at 2:20 PM LaRoy McCann via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> I have a repeater that is linked full time to a hub.  The courtesy tone for
> the linkunkeyct is ct8.  I changed the tone for the linkunkey to another
> tone.  It changed for the network unkey but the local user unkey tone is
> still ct8.  I can not find anywhere this is defined in rpt.conf.  There is
> only unlinkedct, remotect and linkunkeyct defined.  What needs to be
> defined to change the local user unkey tone when the repeater is linked?
>
> LaRoy McCann / K5TW
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>