[arm-allstar] Stumped: Can't use Dinah with 9600 Baud Pin/Kenwood Radio

[Kevin Custer]

There is a menu setting to switch the Kenwood TM-V71A from "1200" to 
"9600".  Have you done that?

Kevin

On 7/4/2023 4:32 PM, Chris via ARM-allstar wrote:
> Hi.
>
> I have a Dinah and a Kenwood TM-V71A.
>
> I have a couple friends with the same set up who have switched DIN plug pins
> 4 and 5, and are getting flatter/nicer audio as a result.
>
> We all ordered the same adapter cable from Mobilink to do this.
>
>   Two of us are hearing ourselves on Allstar when we transmit into the node
> radio with an HT. I am not. I have copied all settings: packet sensitivity,
> SQC, etc. to copy my friend's, and still nothing.
>
>   I have two TM-V71's, so I did a full reset on the second one, and copied my
> friend's settings for the data port and still, no audio.
>
> That rules out a possible problem with one radio's data port.
>
> NOTE: If I crank SimpleUSB menu 2, RX level, all the way up, and turn on RX
> boost, I can hear myself but very quietly.
>
>   Audio coming the other way, from Allstar is fine.
>
>   What could be the problem?
>
> There aren't many things to adjust here, so I am stumped.
>
>   All suggestions welcome.
>
>   Thanks and 73
>
>   Chris
>