[arm-allstar] dmesg -T -W

Thu Dec 28 20:06:15 EST 2023

ya, wall warts can't keep up with all of the USB dongles and such. Get a
bigger one.

On Thu, Dec 28, 2023 at 4:52 PM Steve Liggett via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> I get this output from dmesg -T -W when run from bash shell:
>
> [Thu Dec 28 11:39:43 2023] Under-voltage detected! (0x00050005)
> [Thu Dec 28 12:11:12 2023] Voltage normalised (0x00000000)
> [Thu Dec 28 12:11:14 2023] Under-voltage detected! (0x00050005)
> [Thu Dec 28 12:28:42 2023] Voltage normalised (0x00000000)
> [Thu Dec 28 12:28:44 2023] Under-voltage detected! (0x00050005)
> [Thu Dec 28 13:05:21 2023] Voltage normalised (0x00000000)
> [Thu Dec 28 13:05:23 2023] Under-voltage detected! (0x00050005)
> [Thu Dec 28 13:20:42 2023] Voltage normalised (0x00000000)
> [Thu Dec 28 13:20:44 2023] Under-voltage detected! (0x00050005)
> [Thu Dec 28 13:57:21 2023] Voltage normalised (0x00000000)
> [Thu Dec 28 13:57:23 2023] Under-voltage detected! (0x00050005)
>
>
>
> This is on a Pi3. Has anyone noticed this on their box? Does not seem to
> be related to connecting to a node or other activities.
>
> Steve
> W3RX
> > On Dec 15, 2023, at 12:00 PM, arm-allstar-request at hamvoip.org wrote:
> >
> > Send ARM-allstar mailing list submissions to
> >       arm-allstar at hamvoip.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >       http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > or, via email, send a message with subject or body 'help' to
> >       arm-allstar-request at hamvoip.org
> >
> > You can reach the person managing the list at
> >       arm-allstar-owner at hamvoip.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of ARM-allstar digest..."
> >
> >
> > Today's Topics:
> >
> >   1. Re: time a macro to run (Danny K5CG)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Thu, 14 Dec 2023 08:27:14 -0800 (PST)
> > From: Danny K5CG <k5cg at hamoperator.org>
> > To: Dave Petrie <wa2kjc at gmail.com>
> > Cc: ARM Allstar <arm-allstar at hamvoip.org>
> > Subject: Re: [arm-allstar] time a macro to run
> > Message-ID:
> >       <905671889.272112.1702571234245.JavaMail.zimbra at siminiuk.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Very good Dave. I'm glad you got what you were after.
> >
> > 73
> > Danny, K5CG
> > HH 550-000-0609
> > SKCC 14257
> >
> >
> > From: "Dave Petrie" <wa2kjc at gmail.com>
> > To: "ARM Allstar" <arm-allstar at hamvoip.org>
> > Cc: "Danny Siminiuk" <k5cg at hamoperator.org>
> > Sent: Thursday, December 14, 2023 8:58:45 AM
> > Subject: Re: [arm-allstar] time a macro to run
> >
> > Thanks Danny but you just now replied to the forum so i should reply as
> well.
> > I got a bash script from Patrick N2DYI which did the trick for me/us.
> > I decided not to schedule the event but to have net control run it at
> 6:15 pm
> > and he is very happy with it. The net starts at 6:30 and several text to
> speech
> > announcements by Mary do the job so net control doesn't have to do all
> the talking,
> > script reading and best of all I pointed net control to IAXRPT app on
> his computer
> > and now he has full duplex so he can hear if he or someone is doubling
> during the net.
> > and the OneTouchKeys in the IAXRPT app allow easy tap to play more net
> announcements.
> > another great thing with IAXRPT is the foot switch capability so net
> control can shrink the app down
> > out of site and have access to anything else on his computer during the
> net and use the
> > foot switch to transmit without having to touch the iaxrpt app window.
> > Ah so much fun this Hamvoip software is. If I ever get time and energy i
> will finish my
> > document on my dual band remote base using two cdm1250's 15 channels
> each, remote
> > programmable with voice announcements and channel display on supermon.
> > Thanks again everyone.
> > i attached the file in case anyone else would like to use it.
> > change the node to yours.
> > *543 is a macro to turn off telemetry
> > cqx3 is the first part of the net announcement
> > then the rest are on the iaxrpt OneTouchKeys but can also be dtmf
> commanded.
> >
> > Dave-wa2kjc
> >
> >
> >
> > On Thu, Dec 14, 2023 at 9:24 AM Danny K5CG via ARM-allstar < [ mailto:
> arm-allstar at hamvoip.org | arm-allstar at hamvoip.org ] > wrote:
> >
> >
> > As I mentioned to you privately Dave, setup a cron job for 8:15pm daily
> to check for the existence of a file somewhere (in /tmp?).
> >
> > You can use DTMF commands to create and delete the file.
> >
> > When the cron job runs at 8:15pm, and the file is present, play the
> announcement and delete the file.
> >
> >
> > 73
> > Danny, K5CG
> > HH 550-000-0609
> > SKCC 14257
> >
> > ----- Original Message -----
> > From: "ARM Allstar" < [ mailto:arm-allstar at hamvoip.org |
> arm-allstar at hamvoip.org ] >
> > To: "ARM Allstar" < [ mailto:arm-allstar at hamvoip.org |
> arm-allstar at hamvoip.org ] >
> > Cc: "Dave Petrie" < [ mailto:wa2kjc at gmail.com | wa2kjc at gmail.com ] >
> > Sent: Tuesday, December 12, 2023 8:39:27 AM
> > Subject: Re: [arm-allstar] time a macro to run
> >
> > so basically i need a script something like net.sh that will run a macro
> > at a specified time
> > the time will be 18:15 that the macro runs when ever the net.sh is
> commanded
> >
> > On Tue, Dec 12, 2023 at 8:42 AM Dave Petrie < [ mailto:wa2kjc at gmail.com
> | wa2kjc at gmail.com ] > wrote:
> >
> >> without scheduling to run a macro i want to be able to issue a dtmf
> code
> >> that will run a macro at a specified time for the day i issue it.
> >> i want to run a macro that has voice announcements for a Thursday night
> net
> >> at 18:15 but not every Thursday night, so net control can anytime
> during
> >> the day issue the dtmf command and the macro will play at 18:15 that
> day,
> >> it would be issued on Thursday but it could be issued any day as long
> as it
> >> is a few minutes before the schedule of 18:15.
> >>
> >> Thanks
> >> Dave wa2kjc
> >>
> >>
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > [ mailto:ARM-allstar at hamvoip.org | ARM-allstar at hamvoip.org ]
> > [ http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar |
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar ]
> >
> > Visit the BBB and RPi2/3/4 web page - [ http://hamvoip.org/ |
> http://hamvoip.org ]
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > [ mailto:ARM-allstar at hamvoip.org | ARM-allstar at hamvoip.org ]
> > [ http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar |
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar ]
> >
> > Visit the BBB and RPi2/3/4 web page - [ http://hamvoip.org/ |
> http://hamvoip.org ]
> >
> >
> >
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> >
> > ------------------------------
> >
> > End of ARM-allstar Digest, Vol 115, Issue 8
> > *******************************************
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>