[arm-allstar] using hamvoip as the repeater controller

Jed Barton jed at jedbarton.com
Sat Jul 9 17:01:19 EDT 2022


Hey guys,  Hope everyone is doing well.  Alright, so turning to you
guys for some tips and tricks.  I'm taking the plunge here.  I wanna
put my repeaters on the air using hamvoip as the controller.  I've
been a hardware controller guy for ever, and I just need to take that
first step to putting 1 repeater on the air using hamvoip.  So, where
should I start?  Some things that I need to be able to do.  I need to
be able to turn the transmitter on and off from anywhere in the system
if possible, and have a confirmation message come across.  My plan is
to link all my sites internally with private nodes, to 1 master hub.
Then I'll connect that hub to the hub that'll go outt over the
internet and connect to anywhere.
I am not sure where to setup all these basic macros for doing the
basics.  From a hardware perspective, here's what I've got.  All my
repeaters are Kenwood tkr850s and 750s.  I've got some of the
repeater-builder rims and calbes, so now it's time to cut the cord
from the hardware controller.  Before I do any of that, I wanna start
with 1 repeater that I can get my feet wet on.
Any help, or anyone I can go over things with, it would be enormously helpful.

Cheers,

Jed


More information about the ARM-allstar mailing list