[arm-allstar] occasional RX glitching with simpleusb

[David McGough]

Patrick,

When you soft-reboot an RPi, it completely power cycles the USB bus.  I
suspect you've got either a bad fob, ground loop, intermittent power
supply noise or other similar hardware-level issue.

The 4.19.65-1-ARCH shouldn't be any issue. I still run that kernel on most 
of my deployed (hard to reach) RPi3 systems, no problems at all.


73, David K4FXC


On Mon, 4 Jul 2022, "Patrick Perdue via ARM-allstar" wrote:

> Hi:
> 
> I have a situation where I occasionally get a weird glitchy sound on rx 
> of simpleusb on one of my HamVoIP nodes running on a rPi 3 model B. It 
> sometimes goes away when I reboot the Pi (restarting Asterisk isn't 
> enough) but sometimes, another reboot is required. This happens 
> periodically every few minutes, and only on RX, not TX, and even with 
> local node connections with everything hardwired. Using the same node 
> with IaxRPT or a SIP phone, everything is fine.
> 
> I am running RPi2-3-4 Version 1.7-02 Allstar - May 30, 2022 - K4FXC
> 
> Linux allstar508420 4.19.65-1-ARCH #1 SMP PREEMPT Fri Aug 9 23:29:04 UTC 
> 2019 armv7l GNU/Linux
> 
> Yes, I realize this is an old kernel. Before I go through the trouble of 
> updating that, does this fix timing issues related to simpleusb? I have 
> only started experiencing this recently, perhaps within the past week or so.
> 
> 73
> 
> N2DYI
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>