[arm-allstar] 2 nodes on same network

[Matt Holder]

Awesome!! Thanks 


Sent from Yahoo Mail for iPhone


On Monday, February 21, 2022, 6:19 PM, Kevin Davis <blu666z at gmail.com> wrote:

Both nodes need to know the local ip of the other node.
You do this by adding an entry into the [nodes] stanza of rpt.conf  If you had nodes 12345 (ip of 192.168.1.100) and 54321(192.168.1.101) on your local network...
rpt.conf for 54321 would have...
[nodes]<snip>
12345 = radio at 192.168.1.100:4569/12345,NONE
rpt.conf for 12345 would have...
[nodes]<snip>
54321 = radio at 192.168.1.101:4570/54321,NONE
On Mon, Feb 21, 2022 at 3:51 PM "Matt Holder via ARM-allstar" <arm-allstar at hamvoip.org> wrote:

Hello all,
I am setting up a second node here on a separate pi and running into some issues. I am not able to get the two nodes to connect to each other. I am however able to get them both to connect out to any other node. So I am assuming it is an issue with them being on the same network?
I changed all the ports on the second pi, its reporting to Allstar and I can control it with Supermon just can my my two nodes to actually connect to each other.
Any suggestions?
Thanks,Matt - ke0ncp
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org