[arm-allstar] 2 nodes on same network

[Kevin Davis]

Both nodes need to know the local ip of the other node.

You do this by adding an entry into the [nodes] stanza of rpt.conf  If you
had nodes 12345 (ip of 192.168.1.100) and 54321(192.168.1.101) on your
local network...

rpt.conf for 54321 would have...
[nodes]
<snip>
12345 = radio at 192.168.1.100:4569/12345,NONE

rpt.conf for 12345 would have...
[nodes]
<snip>
54321 = radio at 192.168.1.101:4570/54321,NONE

On Mon, Feb 21, 2022 at 3:51 PM "Matt Holder via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello all,
> I am setting up a second node here on a separate pi and running into some
> issues. I am not able to get the two nodes to connect to each other. I am
> however able to get them both to connect out to any other node. So I am
> assuming it is an issue with them being on the same network?
> I changed all the ports on the second pi, its reporting to Allstar and I
> can control it with Supermon just can my my two nodes to actually connect
> to each other.
> Any suggestions?
> Thanks,Matt - ke0ncp
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>