[arm-allstar] Newbie Question

[larry]

Steve,
If you are talking adding the second radio to the existing Pi you will 
need to create another Stanza in the rpt.conf for node 559821 plus other 
steps.

Seems to me there use to be a How to on this Hamvoip site but I no 
longer see it.

You might try this 
<https://wiki.allstarlink.org/wiki/Two_Nodes_on_One_Server> for guidance.

Larry - N7FM

On 2/16/22 3:11 PM, "jgnatow via ARM-allstar" wrote:
> Normally you do simpleusb.conf
> Follow this info...
> https://hamvoip.org/howto/config-setup.pdf
> 
> 
> John "Jason" Gnatowsky
> KG4FJC
> 434-841-9290
> On Feb 16, 2022 at 11:08 AM, Steve Bosshard (NU5D) via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> 
> Thanks to your help I have a working Allstarlink Node. Now I want to
> add a second radio (the node is a Pi3B using a Masters DRA65 tied to a
> GE Phoenix SX radio and a static internet connection with the
> appropriate ports forwarded). As far as I can tell the Node is
> functioning properly. Now I would like to add a 2nd Radio - The
> existing is 559820 and #2 would be 559821. I have a DRA42 interface,
> Icom 800D (intended for UHF only - not to bother the VHF Phoenix).
> 
> My question - (and I have read the save the existing files, and edit
> usbradio.conf.xxxx) My question - Does usbradio.conf.xxxx replace
> simpleusb.conf, or do the two co-exist? Confusing to me. Steve NU5D
> 
>