[arm-allstar] Enable Macros

[David McGough]

Hi,

Are you trying to use a function or a macro?  *70 is typically  
pre-defined as a function to activate ILINK,5 ....I don't think ILINK,5 
currently generates any audible output.

Try issuing a DTMF command *81  ...That should read back the time of day.

73, David K4FXC


On Sun, 17 Apr 2022, "Stu2 via ARM-allstar" wrote:

> Hello - I installed the latest version of allstar (RPi2-3-4 Version 
> 1.6-14) and ran through the first time node set up. Asterisk decodes the 
> DTMF tones, but the macros don't respond. (e.g. *70)
> 
> Do I have to enable macros somewhere? The macros appear to be defined in 
> /etc/asterisk/rpt.conf.
> 
> I'm using a Raspberry PI4 B, DMK URI and UV-5R HT. Asterisk is 
> configured as duplex=1 in rpt.conf. The CW ID works on start up. I can 
> play the sounds from the CLI using 'rpt cmd 1502 status 12 xxx' and they 
> sound OK.
> 
> I had a similar (but not exact) experience with the BETA PI image on 
> allstarlink.org. I decided to try hamvoip because it seems to be more up 
> to date.
> 
> Here's the decoded messages
> 
> [Apr 17 11:39:38] NOTICE[387]: chan_simpleusb.c:2725 simpleusb_read: Got 
> DTMF char *
> [Apr 17 11:39:38] NOTICE[387]: chan_simpleusb.c:2725 simpleusb_read: Got 
> DTMF char 7
> [Apr 17 11:39:39] NOTICE[387]: chan_simpleusb.c:2725 simpleusb_read: Got 
> DTMF char 0
> link*CLI>
> 
> Thanks for any help you may be able to provide.
> 
> Stu2
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>