[arm-allstar] Rasp Pi4 2GB wont boot with hamvoip 1.6-14

[Joe Moskalski]

Your suggested worked, he is up and running now, thank you!

On Thu, Apr 7, 2022, 4:50 PM N4UPC <n4upc at pm.me> wrote:

> Joe,
>
> It is probably the 1.5 board version. For it to boot HamVoip, do the
> following:
>
> 1) On an unused card, burn the latest Raspberry Pi OS to it and boot it up
> on your new Ras Pi 4B. You can either sftp or use a USB thumb drive to copy
> two files in the /boot directory: start4.elf and fixup4.dat
>
> 2) Once you have these files, shut down the Ras Pi 4B board and remove the
> Ras Pi OS card.
>
> 3) Boot your HamVoip card on your Ras Pi 3B board, go into the /boot
> directory and rename the existing start4.elf to orig-start4.elf and the
> fixup4.dat to orig-fixup4.dat. Copy the the two files from step 1 to the
> /boot directory.
>
> 4) Shut down the Ras Pi 3B, move the card to your new Ras Pi 4B and it
> should boot up.
>
> I can also email you the files if it would be better. Just let me know
> directly.
>
> 73,
> Scott
> N4UPC
> HSH #: 11648
>
>
>
>
> On Thu, Apr 7, 2022 at 14:09, Joe Moskalski via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
>
> A friend of mine who is not local to me is trying install the hamvoip
> 1.6-14 version (latest)
> onto their pi4 but it gives the error upon boot up "start4.elf: is not
> compatible this board
> requires newer software"
> From the research that I have done so far this latest version of Hamvoip
> software solved that issue. Has any else experienced this?
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>