[arm-allstar] Rasp Pi4 2GB wont boot with hamvoip 1.6-14

[N4UPC]

Joe,

It is probably the 1.5 board version. For it to boot HamVoip, do the following:

1) On an unused card, burn the latest Raspberry Pi OS to it and boot it up on your new Ras Pi 4B. You can either sftp or use a USB thumb drive to copy two files in the /boot directory: start4.elf and fixup4.dat

2) Once you have these files, shut down the Ras Pi 4B board and remove the Ras Pi OS card.

3) Boot your HamVoip card on your Ras Pi 3B board, go into the /boot directory and rename the existing start4.elf to orig-start4.elf and the fixup4.dat to orig-fixup4.dat. Copy the the two files from step 1 to the /boot directory.

4) Shut down the Ras Pi 3B, move the card to your new Ras Pi 4B and it should boot up.

I can also email you the files if it would be better. Just let me know directly.

73,
Scott
N4UPC
HSH #: 11648

On Thu, Apr 7, 2022 at 14:09, Joe Moskalski via ARM-allstar <arm-allstar at hamvoip.org> wrote:

> A friend of mine who is not local to me is trying install the hamvoip
> 1.6-14 version (latest)
> onto their pi4 but it gives the error upon boot up "start4.elf: is not
> compatible this board
> requires newer software"
> From the research that I have done so far this latest version of Hamvoip
> software solved that issue. Has any else experienced this?
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org