[arm-allstar] Control-Op Codes

[Darrell Black]

Thank You

On Mon, Oct 25, 2021 at 8:46 PM "Dave Petrie via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> In rpt.conf  under [functions<node>] add these two lines and use whatever
> numbers are available for you, I used 980 and 981.
> You dtmf touch tone *980 and the transmitter shuts off  as well as link
> traffic with no announcement, then when you are ready *981 to turn the
> transmissions back on.
> An announcement will come on "r p t enabled"  , there maybe other ways, I
> have tested this one but haven't needed to use it.
>
> 981=cop,2 ;system enable
> 980=cop,3 ;system disable
>
> On Mon, Oct 25, 2021 at 8:09 PM "Darrell Black via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have a repeater running on Allstar. How does one write a code
> (rpt.conf)
> > to shutdown the transmitter but not the receiver so it can be disabled
> via
> > TT and then re enable via TT when the LID is gone?
> >
> > --
> >
> > Darrell Black
> >
> > (517) 917-2226
> > GigaHacker at gmail.com
> > http://www.linkedin.com/in/darrellblack
> >
> >
> > 73 de W8DSB
> > "In God we trust, all others we monitor"
> >
> > GMRS WRDE739
> > ALLSTAR 50964
> > DMR 310195
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>


-- 

Darrell Black

(517) 917-2226
GigaHacker at gmail.com
http://www.linkedin.com/in/darrellblack


73 de W8DSB
"In God we trust, all others we monitor"

GMRS WRDE739
ALLSTAR 50964
DMR 310195