[arm-allstar] Mototola Sound

[Steve L]

The external speaker enable pins are pins 15 (upper row) and 16 (lower
row) on the far right most pins of the accessory connector. You can
jumper those using a spare computer jumper.

On Sat, Oct 23, 2021 at 10:08 PM "James R. Pilgram via ARM-allstar"
<arm-allstar at hamvoip.org> wrote:
>
> Buy the jumper that goes into the 16 pin connector from someone
> like MRE1032 on ebay.
>
> Jim NH6HI
>
> On Sat, Oct 23, 2021, 16:46 "Michael Webb via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Does the cable actually use those pins?  If not, open up the radio and
> > jumper it from the inside is an option.
> >
> > On Sat, Oct 23, 2021, 9:35 PM "Lewis Horn via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Since the Mororola GM300s need a jumper on 2 of the 16 pins on the back
> > to
> > > enable the internal speaker, and the zrm cable uses the 16 pin ports, is
> > > there another way to enable the internal speaker on the receive radio?
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > >
> > > Lewis
> > >
> > > KD6YTS
> > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org