[arm-allstar] Mototola Sound

[James R. Pilgram]

Buy the jumper that goes into the 16 pin connector from someone
like MRE1032 on ebay.

Jim NH6HI

On Sat, Oct 23, 2021, 16:46 "Michael Webb via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Does the cable actually use those pins?  If not, open up the radio and
> jumper it from the inside is an option.
>
> On Sat, Oct 23, 2021, 9:35 PM "Lewis Horn via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Since the Mororola GM300s need a jumper on 2 of the 16 pins on the back
> to
> > enable the internal speaker, and the zrm cable uses the 16 pin ports, is
> > there another way to enable the internal speaker on the receive radio?
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Lewis
> >
> > KD6YTS
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>