[arm-allstar] RIM-Lite to DR1X Repeater

[Scott Zimmerman]

Mike, I have some notes in an email on my shop pc. Hopefully I'll see this email later (probably morning) and remember to send them to you. Scott Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Mike Sullivan via ARM-allstar <arm-allstar at hamvoip.org> Date: 10/5/21  6:37 PM  (GMT-05:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Mike Sullivan <kn4imu at gmail.com> Subject: [arm-allstar] RIM-Lite to DR1X Repeater Our club is looking at replacements for the CAT-250 controllers currentlyon the repeaters. One of the controllers (actually a 200) has alreadyfailed, while the other 250’s are okay. We are using Allstar nodes on thoseother two repeaters (via the link port) and are looking at a third to actas a link & a controller for the third repeater.Has anyone ever tried directly interfacing to the DR1X repeater using theRIM-Lite or the RIM? I’d like to take full advantage of all the featurespossible (wire up both audio pins to have one send voice, the other send PLtone (for tone-less repeater ID) and use the DR1X’s internal tonecontroller to allow control of functions without a PL tone.Mike_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org