[arm-allstar] ARM-allstar Digest, Vol 90, Issue 16

[Jeff Karpinski]

duplex = 3 and holdofftelem = 0 made no difference. Only (suboptimal) solution was to disable telemetry at the endpoints.

> On Nov 19, 2021, at 8:31 PM, Steve L via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Try;
> duplex = 3
> 
> On Fri, Nov 19, 2021, 9:01 PM "Jeff Karpinski via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Node in question is a radioless hub running on a VPS. I'll try changing
>> holdofftelem but that's rather counter-intuitive.
>> 
>> I'm pretty sure Patrick got it right and this is a limitation of the ASL
>> pseudo node.
>> 
>>> On Nov 19, 2021, at 7:27 PM, Mark VE3JMR via ARM-allstar <
>> arm-allstar at hamvoip.org> wrote:
>>> 
>>> Jeff;
>>> 
>>> The answer in your question: "Majority of the members (and repeaters)
>>> are running HamVoIP with zero issues."
>>> 
>>> Try changing holdofftelem to 0.
>>> 
>>> Also, is your install on an RPi? Do you use the n node only as an
>>> Allstar node or also as the repeater's controller?
>>> 
>>> -------------------------------------
>>> Message: 2
>>> Date: Fri, 19 Nov 2021 11:54:00 -0700
>>> From: Jeff Karpinski <jeff at 3d0g.net>
>>> To: ARM Allstar <arm-allstar at hamvoip.org>
>>> Subject: [arm-allstar] Radioless hub telemetry
>>> Message-ID: <8753CA16-E911-49B5-A53D-8D81CBB421FF at 3d0g.net>
>>> Content-Type: text/plain;    charset=us-ascii
>>> 
>>> Apologies in advance for talking about AllStarLink but I'm hoping some
>>> of you have crossed this bridge before.
>>> 
>>> We've got a VPS based hub node, (running AllStarLink, obviously) that's
>>> used to aggregate connections from our repeaters. We also allow members
>>> to link their own personal nodes to the hub. Majority of the members
>>> (and repeaters) are running HamVoIP with zero issues.
>>> 
>>> Problem is, for the life of me, I cannot get the hub to shut up. It
>>> voice announces every single connect and disconnect into it back out to
>>> all nodes. As AllStar's popularity has grown in the club, the number of
>>> nodes has exploded and it's hugely annoying to the repeater users
>>> hearing connect / disconnect messages constantly.
>>> 
>>> Soo, anyone been down this path before? Here's the pertinent bits from
>>> the hub rpt.conf. I could also post the whole damn thing to pasebin if
>>> it helps.
>>> 
>>> duplex = 2
>>> linktolink = no
>>> hangtime = 0
>>> althangtime = 0
>>> telemdefault = 0
>>> holdofftelem = 1
>>> telemdefault = 0
>>> telemdynamic = 0
>>> nounkeyct = 1
>>> ; idrecording = |ie
>>> ; idtalkover = |ie
>>> 
>>> 73 75 de VE3JMR
>>> Mark
>>> Port Colborne, Ontario
>>> CANADA
>>> https://www.qrz.com/db/VE3JMR
>>> Allstar Node# 53132 [1]
>>> Echolink Node# 736666
>>> 
>>> LIFE has an expiry date.
>>> <if trumpet=%true then exit function>
>>> 
>>> Links:
>>> ------
>>> [1] http://stats.allstarlink.org/stats/53132
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org