[arm-allstar] ARM-allstar Digest, Vol 90, Issue 16
Steve L
kb9mwr at gmail.com
Fri Nov 19 22:31:27 EST 2021
Try;
duplex = 3
On Fri, Nov 19, 2021, 9:01 PM "Jeff Karpinski via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> Node in question is a radioless hub running on a VPS. I'll try changing
> holdofftelem but that's rather counter-intuitive.
>
> I'm pretty sure Patrick got it right and this is a limitation of the ASL
> pseudo node.
>
> > On Nov 19, 2021, at 7:27 PM, Mark VE3JMR via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Jeff;
> >
> > The answer in your question: "Majority of the members (and repeaters)
> > are running HamVoIP with zero issues."
> >
> > Try changing holdofftelem to 0.
> >
> > Also, is your install on an RPi? Do you use the n node only as an
> > Allstar node or also as the repeater's controller?
> >
> > -------------------------------------
> > Message: 2
> > Date: Fri, 19 Nov 2021 11:54:00 -0700
> > From: Jeff Karpinski <jeff at 3d0g.net>
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Subject: [arm-allstar] Radioless hub telemetry
> > Message-ID: <8753CA16-E911-49B5-A53D-8D81CBB421FF at 3d0g.net>
> > Content-Type: text/plain; charset=us-ascii
> >
> > Apologies in advance for talking about AllStarLink but I'm hoping some
> > of you have crossed this bridge before.
> >
> > We've got a VPS based hub node, (running AllStarLink, obviously) that's
> > used to aggregate connections from our repeaters. We also allow members
> > to link their own personal nodes to the hub. Majority of the members
> > (and repeaters) are running HamVoIP with zero issues.
> >
> > Problem is, for the life of me, I cannot get the hub to shut up. It
> > voice announces every single connect and disconnect into it back out to
> > all nodes. As AllStar's popularity has grown in the club, the number of
> > nodes has exploded and it's hugely annoying to the repeater users
> > hearing connect / disconnect messages constantly.
> >
> > Soo, anyone been down this path before? Here's the pertinent bits from
> > the hub rpt.conf. I could also post the whole damn thing to pasebin if
> > it helps.
> >
> > duplex = 2
> > linktolink = no
> > hangtime = 0
> > althangtime = 0
> > telemdefault = 0
> > holdofftelem = 1
> > telemdefault = 0
> > telemdynamic = 0
> > nounkeyct = 1
> > ; idrecording = |ie
> > ; idtalkover = |ie
> >
> > 73 75 de VE3JMR
> > Mark
> > Port Colborne, Ontario
> > CANADA
> > https://www.qrz.com/db/VE3JMR
> > Allstar Node# 53132 [1]
> > Echolink Node# 736666
> >
> > LIFE has an expiry date.
> > <if trumpet=%true then exit function>
> >
> > Links:
> > ------
> > [1] http://stats.allstarlink.org/stats/53132
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
More information about the ARM-allstar
mailing list