[arm-allstar] Setting up Alinco DR135/235/435 for Node Use?

[Steve Agee]

*Correction:
I should have said the simpleusb channel driver now allows for both pre 
and de emphasis.

N5ZUA
*
On 5/12/2021 9:01 AM, "Steve Agee via ARM-allstar" wrote:
> *I don't own that Alinco model, but for most similar models, you must 
> select 9600 baud for true "flat" audio, and 1200 baud for 
> "de-emphasized" or "speaker" audio. Keep in mind, that while KB4FXC 
> has made improvements to the usbradio channel driver, it still has 
> some minor issues, such a tiny millisecond holes in the audio 
> occasionally. The usbradio channel driver now allows for both 
> pre-emphasis and de-emphasis, and is the better choice for audio 
> quality, unless there is some other reason you must have "flat" audio 
> for your situation.
>
> N5ZUA
> *
> On 5/12/2021 8:29 AM, "Chris Smart via ARM-allstar" wrote:
>> Hi.
>>
>>
>> I have the Rim-Alinco device and am about to receive a DR-435TMKIII. 
>> Do I need to do anything on the Alinco, like select a baud rate in 
>> order to obtain flat audio in and out?
>>
>>
>> I'm asking because doing this on a Kenwood TMV71A for example, does 
>> require changing a few settings.
>>
>>
>> thanks,
>>
>> Chris
>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org