[arm-allstar] Setting up Alinco DR135/235/435 for Node Use?

[Steve Agee]

*I don't own that Alinco model, but for most similar models, you must 
select 9600 baud for true "flat" audio, and 1200 baud for 
"de-emphasized" or "speaker" audio. Keep in mind, that while KB4FXC has 
made improvements to the usbradio channel driver, it still has some 
minor issues, such a tiny millisecond holes in the audio occasionally. 
The usbradio channel driver now allows for both pre-emphasis and 
de-emphasis, and is the better choice for audio quality, unless there is 
some other reason you must have "flat" audio for your situation.

N5ZUA
*
On 5/12/2021 8:29 AM, "Chris Smart via ARM-allstar" wrote:
> Hi.
>
>
> I have the Rim-Alinco device and am about to receive a DR-435TMKIII. 
> Do I need to do anything on the Alinco, like select a baud rate in 
> order to obtain flat audio in and out?
>
>
> I'm asking because doing this on a Kenwood TMV71A for example, does 
> require changing a few settings.
>
>
> thanks,
>
> Chris
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org