[arm-allstar] Won't Boot - tried all the usual stuff

[Patrick Perdue]

You intend to use this for a SHARI hat? Have you modified cmdline.txt as 
instructed on the SHARI website? If so, there was (still may be) a 
documentation error, in which there is an uppercase P instead of a lower 
case p in cmdline.txt. If you haven't yet made this change, no idea.


On 5/10/2021 6:09 PM, "Temporarily Offline via ARM-allstar" wrote:
> Hardware: Pi4 4GB, Latest Firmware
>
> Working: I've downloaded the latest image, all the checksums match.
>
> Broken: I've used etcher to burn the .img.xz and the .img also. Neither
> boot. The pi initializes and it goes to the rainbow screen after finding
> the SD card... or it doesn't make it to the rainbow screen.
>
> Working: I've used etcher to burn the Raspbian image, boots fine
>
> Working: I've used the Arch method to create an Arch SD card
>
> Working? I've tried a 3a and 3.5am power supply both work with Raspbian and
> Arch
>
> Working:  I've used 2 different Sandisk branded SD cards to boot Rasbian
>
> Working: I've used an RPi4-8GB model
>
> I have gotten the image to boot once on 8GB model with 3.5a power supply,
> but that wasn't its intended home and needed to move it back.  I moved the
> 3.5a power supply to the Pi4x4 and tried to boot it up bare (no Shari hat)
>
> I'm trying `dd` to burn the image now, but I'm not sure that will help.
>
> Thoughts?
> - TO
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org