[arm-allstar] ARM-allstar Digest, Vol 82, Issue 12

[George Csahanin]

> 
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 8 Mar 2021 17:56:21 -0600
> From: LaRoy McCann <laroy.mccann at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] RXAUDIODELAY setting
> Message-ID:
> 	<CAF6L7xainn_q_mJA9gEL_Hb0doGt7wjbm-FQbdVhNNkbdcedrw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
> 
> I was just trying to let David know there was an error in the message that
> option N gives.  It states you can enter a value of 1-26.  It will only
> accept a value of 1-25.  I was just trying different values it see if I
> could eliminate the squelch tail on a Motorola MTR2000.  I have my setting
> at 5 but even at higher values I could not completely eliminate the squelch
> tail.
> 
> 


LaRoy, something isn't right there. The MTR should not be making squelch tails. Motorola radios are real good about this. What I use, always, is the radio's squelch output. Been quite a while sinceI worked on a MTR but there should be a "receive signal ok" output. However, if using non-Motorola radios talking to it some will do reverse burst correctly, and some won't…especially the stuff sold into the amateur market.

73
GeorgeC W2DB 2360, 28599