[arm-allstar] RXAUDIODELAY setting

[David McGough]

Thanks for point out this bug, it was a typo in the simpleusb_tune_menu 
program. I've fixed this for release in the next code update.

The values 0 thru 25, inclusive, were the original intended range for this 
parameter.


73, David KB4FXC


On Mon, 8 Mar 2021, "LaRoy McCann via ARM-allstar" wrote:

> I was just trying to let David know there was an error in the message that
> option N gives.  It states you can enter a value of 1-26.  It will only
> accept a value of 1-25.  I was just trying different values it see if I
> could eliminate the squelch tail on a Motorola MTR2000.  I have my setting
> at 5 but even at higher values I could not completely eliminate the squelch
> tail.
> 
> On Mon, Mar 8, 2021 at 5:29 PM "Chris Smart via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> > try somewhere between 4 and 6.
> >
> > 1 = 20 ms.
> >
> >
> >
> > On 2021-03-08 1:52 p.m., "LaRoy McCann via ARM-allstar" wrote:
> > > David,
> > > I noticed that simpleusb-tune-menu option N tells you  "Enter new
> > > rxaudiodelay setting (0-26, or C/R for none):"  but 25 seems to be the
> > > largest value it will take.
> > >
> > > LaRoy McCann
> > > K5TW
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>