[arm-allstar] Motorola as Node Radio

[B Harvey]

I've been using an Alinco DR-435T MKIII as a node radio for several years
with no problem at all. I run it at low power but have a small, 4" fan
running on it at all times. (Probably more for my peace of mind than for
the benefit of the radio) It comes from the factory with a serial port that
wires up to my node interface just fine. I think I paid about $270 for it
about 4 years ago. I researched a few different radios and this model (a
70cm one) was recommended. I've come to agree with that recommendation.

Brian
KK6DOQ

On Tue, Mar 2, 2021 at 4:33 PM "Chris Smart via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Basically, I want to interface the best performing radio with a PI for a
> home-based node.
>
>
> What radio should I get, preferably used?
>
> Something from Motorola? Or something else?
>
>
> All suggestions welcome.
>
>
> This would be on 70 CM and preferably low power.
>
>
> Antenna ideas welcome as well.
>
>
> Chris
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>