[arm-allstar] how to adjust?

[David McGough]

Jim,

The simpleusb command rxondelay will probably fix your issue.  See:

http://lists.hamvoip.org/pipermail/arm-allstar/2018-September/010154.html

Note that you can dynamically adjust the rxondelay value from the 
simpleusb-tune-menu program, option 'M'


73, David KB4FXC


On Sun, 27 Jun 2021, "Jim Hertel via ARM-allstar" wrote:

> When I am remoteing to the repeater it has a short hang time on the back 
> bone but not short enough, so the Allstar unit cycles tx to rx, so I 
> need to lengthen the pulse time or hang time of the allstar, so it will 
> stop cycling. And completely drop. So i need a pause or something.
> 
> 
> On 6/27/2021 5:44 PM, "David McGough via ARM-allstar" wrote:
> > Hi Jim,
> >
> > I don't know what you mean by pulse time?
> >
> > 73, David KB4FXC
> >
> >
> > On Sun, 27 Jun 2021, "Jim Hertel via ARM-allstar" wrote:
> >
> >> is there a way to adjust the pulse time on a allstar unit?
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>