[arm-allstar] HamVoip Registration

[David McGough]

[This message was originally blocked due to formatting. Manually forwarded 
to the list by kb4fxc.]


Scott,

When utilizing multiple private off grid nodes you will need to add the IP 
of the other nodes in each others rpt.conf [nodes] section.
If a Pi server contains more than a single node you must have a Stanza 
created in the rpt.conf file for each (multiple) node number on that 
server.

Within each Stanza for every node number the [nodes] section will need all 
the other private node IP and port info.

Basically you get to build your own private lookup without the need for 
registering elsewhere when using private nodes.

Since private nodes can utilize their own choice of node numbers I have a 
hard time seeing how you could have a global lookup or registration with 
many nodes possibly having the same numbers.

Then again maybe I'm not following the intent of what you are asking.

Larry - N7FM


On Sun, 25 Jul 2021, "Scott Hostetler via ARM-allstar" wrote:

> Maybe I am overlooking something, but I was wondering if the HamVoip
> Registration for private nodes is in place yet?  I see comments about this
> becoming a thing, but no updates to it happening.
> 
> I just want to clarify...  I have a node connected to the Allstar Network
> using HamVoip, this will be the Hub.  But about to place several private
> nodes at my site to connect the repeaters and link radios together that
> will not be connectable from anyone outside my network unless they connect
> to my public Allstar Hub Node.  This will allow repeaters and rf links to
> connect together without public connection unless they are connected to the
> hub...
> 
> Thanks for the clarification!
> 
> Scott
> K4MDI
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>