[arm-allstar] New repeater linking issue

[Tom Whiteside]

Hi Larry.   All the local and external addresses are the same before and
after the router change and I have made no changes to anything.   The only
connections defined there are for the two local nodes plus the Echolink
node.   The other repeater gets connected externally when they are linked.
That external one is the one not working.  Below are the nodes definitions.

Tom N5TW

[nodes]
; Note, if you are using automatic updates for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local (within your LAN) nodes, and private (off of allstar
; link) nodes here.
 
43115 = radio at 127.0.0.1:4568/43115,NONE
43117 = radio at 172.20.48.231:4569/43117,NONE
43774 = radio at 127.0.0.1:4568/43774,NONE

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Larry via
ARM-allstar"
Sent: Tuesday, January 19, 2021 12:30 PM
To: Tom Whiteside via ARM-allstar <arm-allstar at hamvoip.org>
Cc: Larry <larry at thunderbolt.net>
Subject: Re: [arm-allstar] New repeater linking issue

Tom,

By chance with the new router... Have you hard coded the Nodes section of
the External or Internal Nodes with info that may have changed when the new
Router was installed.?

Larry - N7FM