[arm-allstar] New repeater linking issue

[David McGough]

Tom,

This issue sounds like slow updating of the node IP address in the 
registration system. I can get you some HamVoIP registration statements to 
try, if you would like?  If so, follow up with me off list.


73, David KB4FXC


On Tue, 19 Jan 2021, "David McGough via ARM-allstar" wrote:

> 
> 
> Date: Tue, 19 Jan 2021 09:37:15 -0600
> From: Tom Whiteside <tomw at ecpi.com>
> To: 'ARM Allstar' <arm-allstar at hamvoip.org>
> Subject: New repeater linking issue
> 
> 
> I've been running three repeaters here for years using the arm-allstar
> code and all have been working fine until a recent network upgrade
> necessitated by a failed router. This router is not maintained by me.
> 
> Here is the situation:
> 
> Two of the repeaters can share the same local address space and I have
> linking information called out in the bottom of the rpt.conf files - those
> two repeaters are linking just fine. They have static IP addresses that
> can be pinged from here outside the network. Putty works fine to them.
> 
> The third is outside the local network and attempting to connect to one of
> the external nodes is not working.
> 
> All three repeaters are showing up in green on the Allstar node list.
> 
> Nothing shows linked on the bubble charts.
> 
> I figured it was a port issue but, to my surprise, Zoiper connections 
> work. Echolink works.
> 
> Again, all was working before the network change. Any coaching on what to 
> do? BTW nodes 43115 and 43117 are the ones behind this network.
> 
> Tom N5TW
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>