[arm-allstar] Echolink.conf

[David McGough]

Change the config to:

server1=server1.echolink.org
server2=server3.echolink.org
server3=server6.echolink.org


...Save the file and restart.


73, David KB4FXC



On Sat, 16 Jan 2021, Anthony (N2KI) wrote:

> So the node has mysteriously started to work again.  Albeit,,looking at the
> AST Log, is this anything to be concerned about?  Should I comment out this
> particular server? There are a few hundred entries in the log.
> 
> [Jan 16 18:02:38] ERROR[333] chan_echolink.c: connect() failed to
> connect to the Echolink server server4.echolink.org
> [Jan 16 18:12:37] ERROR[333] chan_echolink.c: connect() failed to
> connect to the Echolink server server4.echolink.org
> [Jan 16 18:22:36] ERROR[333] chan_echolink.c: connect() failed to
> connect to the Echolink server server4.echolink.org
> 
> 
> Regards,
> 
> Anthony (N2KI)
> 
> 
> 
> 
> 
> 
> 
> 
> 
> On Sat, Jan 16, 2021 at 11:23 AM "David McGough via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> >
> > Aaron,
> >
> > Please update your config file!  The power and height parameters are
> > invalid!  These parameters should use the standard APRS designations:
> >
> > ;;;
> > ;;; For power, height, gain and dir, use the digits 0 thru 9:
> > ;;;
> > ;;;  DIGITS   0  1  2   3   4   5   6    7    8    9         Equation
> > ;;;  -------------------------------------------------------------------
> > ;;;  POWER    0, 1, 4,  9, 16, 25, 36,  49,  64,  81  watts  SQR(P)
> > ;;;  HEIGHT  10,20,40, 80,160,320,640,1280,2560,5120  feet   LOG2(H/10)
> > ;;;  GAIN     0, 1, 2,  3,  4,  5,  6,   7,   8,   9  dB
> > ;;;  DIR      0,45,90,135,180,225,270, 315, 360,   .  deg    (D/45)
> > ;;;
> > ;;;  FOR EXAMPLE:
> > ; power: 25W, height: 80ft, gain: 6dB, dir: 180 deg
> > ;power=5
> > ;height=3
> > ;gain=6
> > ;dir=4
> > ;
> >
> >
> > 73, David KB4FXC
> >
> >
> >
> >
> > On Sat, 16 Jan 2021, "Aaron Groover via ARM-allstar" wrote:
> >
> > > This does happen however the simplest solution is this conf file. Delete
> > > the current echolink.conf text entry and replace with the following. MAKE
> > > SURE TO EDIT YOUR CREDENTIALS
> > >
> > > [el0]
> > > confmode=no
> > > call=XXXXXX-R       ; Change this!
> > > pwd=XXXXXXX         ; Change this!
> > > name=Aaron Groover           ; Change this to your real name!
> > > qth=Palmerton, PA    ; Change this to your actual QTH!
> > > email=XXXXXX ; Change this!
> > > maxstns=20
> > > rtcptimeout=10
> > > node=XXXXXX         ; Echolink node number - Change this!
> > > recfile=/tmp/recorded.gsm
> > > astnode=XXXXX       ; Change this to your active Allstar node number!
> > > context=radio-secure
> > > server1=server1.echolink.org
> > > ;server2=server5.echolink.org
> > > server3=server3.echolink.org
> > > server2=naeast.echolink.org
> > > ;nasouth.echolink.org
> > > ;servers.echolink.org
> > > ;backup.echolink.org
> > > ; Change following setting to your parameters
> > > freq=446.1
> > > tone=88.5
> > > lat=40.223976
> > > lon=-75.008529
> > > power=20
> > > height=50
> > > gain=6
> > > dir=0
> > > ;deny=
> > > ;permit=
> > >
> > >
> > >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>