[arm-allstar] Echolink.conf

[David McGough]

Aaron,

Please update your config file!  The power and height parameters are 
invalid!  These parameters should use the standard APRS designations:

;;;
;;; For power, height, gain and dir, use the digits 0 thru 9:
;;;
;;;  DIGITS   0  1  2   3   4   5   6    7    8    9         Equation
;;;  -------------------------------------------------------------------
;;;  POWER    0, 1, 4,  9, 16, 25, 36,  49,  64,  81  watts  SQR(P)
;;;  HEIGHT  10,20,40, 80,160,320,640,1280,2560,5120  feet   LOG2(H/10)
;;;  GAIN     0, 1, 2,  3,  4,  5,  6,   7,   8,   9  dB
;;;  DIR      0,45,90,135,180,225,270, 315, 360,   .  deg    (D/45)
;;;
;;;  FOR EXAMPLE:
; power: 25W, height: 80ft, gain: 6dB, dir: 180 deg
;power=5
;height=3
;gain=6
;dir=4
;


73, David KB4FXC




On Sat, 16 Jan 2021, "Aaron Groover via ARM-allstar" wrote:

> This does happen however the simplest solution is this conf file. Delete
> the current echolink.conf text entry and replace with the following. MAKE
> SURE TO EDIT YOUR CREDENTIALS
> 
> [el0]
> confmode=no
> call=XXXXXX-R       ; Change this!
> pwd=XXXXXXX         ; Change this!
> name=Aaron Groover           ; Change this to your real name!
> qth=Palmerton, PA    ; Change this to your actual QTH!
> email=XXXXXX ; Change this!
> maxstns=20
> rtcptimeout=10
> node=XXXXXX         ; Echolink node number - Change this!
> recfile=/tmp/recorded.gsm
> astnode=XXXXX       ; Change this to your active Allstar node number!
> context=radio-secure
> server1=server1.echolink.org
> ;server2=server5.echolink.org
> server3=server3.echolink.org
> server2=naeast.echolink.org
> ;nasouth.echolink.org
> ;servers.echolink.org
> ;backup.echolink.org
> ; Change following setting to your parameters
> freq=446.1
> tone=88.5
> lat=40.223976
> lon=-75.008529
> power=20
> height=50
> gain=6
> dir=0
> ;deny=
> ;permit=
> 
> 
>