[arm-allstar] Unable to View Node Status - Can not find info for node 40260

[Jeff Hochberg]

Ahh - that old chestnut! Perhaps that's what I'm running into. I wonder why
EL won't connect???

I'll leave it alone - I was hoping to get this installed tomorrow but if it
doesn't happen...it doesn't happen.

On Sat, Jan 2, 2021 at 5:45 PM David McGough <kb4fxc at inttek.net> wrote:

>
> Hi Jeff,
>
> What you're seeing isn't an installation issue. The ASL network folks made
> some major network infrastructure ungrades this last week and the dust
> still seems to be settling.
>
> The stats.allstarlink.org message: "Can not find info for node 40260,
> invaild node number or a temporary communications error, please try again
> later. " isn't a show-stopper.  You're still operable.
>
> Leave the node on-line for a few hours and we'll keep our finger crossed
> that it starts showing up on the stats system.
>
> Again, this isn't a show-stopper.
>
> 73, David KB4FXC
>
>
>
> On Sat, 2 Jan 2021, Jeff Hochberg wrote:
>
> > Hi David,
> >
> > Thanks for your quick response. Unfortunately those changes don't
> > make a difference.
> >
> > I had only modified the remote base/frequency agile options (from no to
> > yes) a few minutes ago. They had been set to the default settings all
> along.
> >
> > When I ran through the initial setup wizard, there was a question that
> > asked if I wanted to send stats to AllStarLink...I chose yes. That's how
> > I've been answering the question each time.
> >
> > When I looked in rpt.conf, the two lines you asked me to uncomment were
> > already uncommented.
> >
> > FYI I've even re-imaged the SD card - even used different SD cards -
> > several times. This happens consistently each and every time. I've been
> > fighting with it for 2 days straight.
> >
> > [image: image.png]
> >
> >
> > ***************************************************
> > Georgia Digital: http://dmr.georgiadigital.net/ipsc
> > GeorgiaDMR.net on Groups.io: https://groups.io/g/GeorgiaDMR
> > Appalachian Trail Golden Packet: https://atgp.groups.io/g/main
> > ***************************************************
> >
> > Jeff Hochberg
> > W4JEW
> > Atlanta, GA
> > 404-304-4575
> > jeff at w4jew.com
> >
> >
> > On Sat, Jan 2, 2021 at 5:31 PM David McGough <kb4fxc at inttek.net> wrote:
> >
> > >
> > > Jeff,
> > >
> > > There are a couple of issues that I see. First, go to the
> allstarlink.org
> > > portal and into the section Portal-->node settings-->40260 ...On this
> > > setup screen, take a look at the right side and set "Is node a remote
> base
> > > station?" to NO and set "If remote base, is it frequency agile?" to NO.
> > >
> > > ...And, save the settings (submit).
> > >
> > > Then, on your node itself, login and go the the bash shell prompt
> (admin
> > > menu #9). Then, edit (e.g.: nano) the /etc/asterisk/rpt.conf file.
> Look
> > > down the [40260] stanza to the point where you see the statpost lines
> and
> > > uncomment them, like this:
> > >
> > > ...change:
> > >
> > > ;statpost_program=/etc/asterisk/local/send_node_stats.sh
> > > ;statpost_url=none
> > >
> > > ...to:
> > >
> > > statpost_program=/etc/asterisk/local/send_node_stats.sh
> > > statpost_url=none
> > >
> > >
> > > ...then, save the file. Type "exit" to go back to the admin menu and
> then
> > > reboot.
> > >
> > > These changes should get you fixed up.
> > >
> > > 73, David KB4FXC
> > >
> > >
> > > > Date: Sat, 2 Jan 2021 17:16:58 -0500
> > > > From: Jeff Hochberg <jeff at w4jew.com>
> > > > To: arm-allstar at hamvoip.org
> > > > Subject: Unable to View Node Status - Can not find info for node
> 40260
> > > >
> > > > Hello,
> > > >
> > > > This is driving me crazy! I've been fighting with this for a couple
> of
> > > > days and can't really find anything that indicates what the issue
> might
> > > > be.
> > > >
> > > > When I go to Lists & Stats, AllStar Node List, then I look up my
> node ID
> > > > number (40260). The indicator is lit up green (see screenshot) -
> > > something
> > > > thinks I'm connected. Then I click on the 40260 link and
> consistently get
> > > > the following message:
> > > >
> > > > "Can not find info for node 40260, invaild node number or a temporary
> > > > communications error, please try again later."
> > > >
> > > > At first, I thought there was a firewall issue, however I literally
> have
> > > > the Pi hanging out on the naked Internet...no NAT...no firewall
> > > whatsoever
> > > > and I'm still getting the same results.
> > > >
> > > > If I check /var/log/asterisk/messages, I see the following:
> > > >
> > > > Registered IAX2 to '34.105.111.212', who sees us as
> 23.127.128.81:4569
> > > > with no messages waiting
> > > >
> > > > That looks good, right? So what else might be wrong with my
> > > configuration?
> > > >
> > >
> > >
> >
>
>