[arm-allstar] How to disconnect node when Echolink connects

[Jason Schollenberger]

You could use the connpgm and discpgm settings in rpt.conf to launch a
script to handle that. Your node number and the remote node number are
passed as variables.

https://wiki.allstarlink.org/wiki/Rpt.conf#connpgm.3D_and_discpgm.3D

You would just need some logic in there to test if the remote is an
echolink node, then execute the asterisk commands to connect or disconnect
your specific node.

- Jason

On Sat, Feb 13, 2021 at 10:01 AM "John Simmons via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I'd like to disconnect one node when Echolink connects. I assume that I
> would need a CRON job. I'd like to re-connect that same node when the
> Echolink disconnects.
>
> Guidance?
>
> --
> 73,
> -de John NI0K in rural Debs, MN USA
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>