[arm-allstar] Macro Delay

[David McGough]

Hi Mike,

Yes, something like will work:

rpt cmd 1798 cop 48 !0/4000,1,2,3,A,B,C

...sending the DTMF sequence 123ABC to node 1798, after a delay of 4000mS.

You can turn this into a function like:

[functions]
987=cop,48,!0/4000,1,2,3,A,B,C


Then, call from the startup_macro like:

startup_macro=*987#


73, David KB4FXC


On Thu, 29 Oct 2020, "Mike Sullivan via ARM-allstar" wrote:

> I know there is an ability to delay the startup_macro, but is there a way
> to delay a DTMF macro something like 3-5 seconds before executing? I'm
> trying to set up a connect/disconnect macro for a RF link thru Allstar, but
> I've had an issue where the radio still shows Rx keyed even when in
> transmit, so if that happens after the macro, the node locks up and stays
> keyed up.
> 
> Mike
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>