[arm-allstar] Built In Fan Control Script

[David McGough]

Hi David,

Did you get this resolved?  If not, I'll try to help.


73, David KB4FXC

On Fri, 2 Oct 2020, "David H. via ARM-allstar" wrote:

> I’ve usually had pretty good luck trying to figure out how to get mist of the scripts working, but I don’t have a whole lot of spare time at the moment, so I’ll ask for some help this time around.

I’m trying to use the built in fan control script.  I’ve added this to {events51644] in rpt.conf

touch /tmp/RPT_TXXKEYED = s|t|RPT_TXKEYED
rm -f /tmp/RPT_TXKEYED = s|f|RPT_TXKEYED

When I run fan_control.sh it just keeps scrolling “no tx” down the screen in the bash shell interface.  Under the CLI interface it doesn’t show anything when I key up.  When I unkey it shows this:

Event on node 51644 doing rpt command cop,62,GPIO4:0 for condition c|f|RPT_RXKEYED
Event on node 51644 doing shell command touch /tmp/RPT_TXXKEYED for condition s|t|RPT_TXKEYED

Any ideas what I missed somewhere? 
 

---
Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org